First up were the standard Bear X arrows that were delivered with the crossbow. I’ve shot 2 different arrows with different weights. Do not try to shoot arrows at the exact same spot, you’ll split a lot of arrows!Īfter sighting in the scope, I decided to speed test the Saga 405. It’s an insanely accurate and powerful crossbow at such a low price. It’s also pretty lightweight with all the accessories attached to it as well.ĭuring the sighing in of the scope, the arrows were buried deep inside the target so I had to switch it out for a tougher target. Getting the Bear X Saga 405 to be a comfortable crossbow is very easy with the adjustable butt-stock and foregrip. With my fourth shot I already split an arrow. It only took me 3 shots to get it fully zeroed in. During optimal light conditions, I was able to sight it in pretty easily. Like I already mentioned in the #Optics section, the Bear X Saga features a basic 4x32 scope. Even for beginners and really taking your time, it should take no more than 30 minutes. Due to a lot of experience with assembling crossbows, this crossbow only took me about 5 minutes maximum. If you carefully read the instruction manual, assembling the Bear X Saga 405 isn’t a difficult task at all. You’ll have to assemble the crossbow yourself and make sure the scope is properly zeroed in before you go out on a hunting trip. Assembly and Sighting-Inīear Archery doesn’t ship the Bear X Saga 405 assembled and sighted in. Once you’re used to the trigger, this isn’t really an issue anymore. This trigger has quite a smooth pull but has a bit of creep. It’s a basic trigger with an ambidextrous safety switch and an anti-dry fire inhibitor prevents you from shooting this crossbow without an arrow loaded. The Bear X Saga 405 comes with a trigger that has a 4-pound pull. As with most rope-cockers, it reduces the draw-weight by about 50% and you’ll definitely need it! Cocking a crossbow with a draw-weight of 210 pounds can be quite difficult, but by using the right technique it should still be very doable.īear X does not make any crank-cocking devices and therefore it is not compatible with a crank-cocking device.Ĭheck Price of the Bear X Saga 405 on Amazon! Trigger and Safety Features At this price level you can’t ask for more, you can however upgrade the scope later.īear offers the Bear X Archery Speed Scope for crossbows from 205 to 430 feet per second and you should be able to hit targets at up to 100-yards! Cockingīear X offers a basic T-handle cocking rope for the Bear X Saga 405. Mounted on the Bear X Saga 405 is a non-illuminated 4x32 scope with a multi cross-hair reticle with functioning eye piece. By switching the lever, you can easily attach and detach the quiver to this crossbow. If you’re looking for broadheads to use with these arrows, please check out our list of 16 best broadheads.Īlso included is a 4-Arrow Lever Lock quiver. These TrueX arrows come with TrueX Nock Technology but to be able to shoot them Bear X only recommends using these arrows with their Bear X crossbows that come in at under 12-inches wide when cocked. Unfortunately, the Bear X Saga 405 isn’t narrow enough for the special TrueX arrows from Bear X. It has a 270-grain shaft and a 100-grain field tip. These arrows from Bear X feature basic half-moon nocks and they have a total weight of about 370-grains. Included with this package are three 20-inch carbon bolts with field points. This is an incredibly fast and powerful crossbow at such a cheap price. Check Price of the Bear X Saga 405 on Amazon! Arrows and Speedīear X speed-rated the Saga 405 at 405 feet per second with a draw weight of about 210 pounds.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |